Maintain your vehicle as well as possible using some simple procedures in order to enjoy its maximum lifespan. For your vehicle to be efficient, it must be at the right temperature brought about by the presence of a radiator. A radiator is a heat exchanger made of two tanks that are linked by a core consisting of several tubes. The coolant becomes hot when the car is one causing the need for its temperature to be lowered by cooler air that enters through the narrow tubes when the car is in motion.
Flushing a radiator ensures the engine cooling system works efficiently to avoid overheating the engine that might have serious repercussions. Flushing the engine removes dirt that might diminish the purity of the mixture of antifreeze and distilled water that cools the engine. To avoid corrosion of some engine parts the coolant should be regularly changed. Flushing of a radiator works best when the engine is fully cooled like a day when the vehicle has not been used.
A clean coolant of standard purity is used to refill the radiator after draining the old one and the radiator properly washed with a flushing agent. The flushing agent removes dirt particles that could cause rusting or blockage of these engine parts. Draining the coolant mixture can be easily done at home or at a local garage in case you need any help with it.
Refill the radiator with distilled water and the flushing agent after putting back the radiator plug and turn on the engine while following the flushing agent’s instructions. To completely get rid of the cleaning mixture, open valves on the cylinder and drain the engine once again. Now the engine is ready to be refilled with fresh anti-freeze which is diluted using distilled water in case dilution is required. Excess air if not gotten rid of might result in minor overheating that might have serious damages to the engine, check out and click here for more info!
You can start the engine to ensure the temperatures are normal after adding the coolant then turning it off to get rid of more trapped air in the system. How often a radiator should be flushed depends on the vehicle and probably the weather you tend to drive in. A once in every five years flushing is a healthy habit for your vehicle but it should not be limited to that because sometime early flushing might be needed like due to the presence of rust around the engine area. In this site, you will learn more about how often a radiator should be flushed because cars differ from one another. For more info. about car maintenance practices, click here for more.